Upload the file, get the part.
The manufacturing network for people who already have the file
No printer, or not the right one: send us the sliced file you trust, ready to print from your slicer, or the 3D model for a producer to slice. You see the price on the spot, and a verified producer prints the part. Your payment waits until you accept it.
Drop your file here and see what it costs.
or drop it here
Sliced files and models both work: STL, OBJ, or 3MF without slicing.
Privacy PolicyTerms of Service
No file at hand? Open one of ours:
Only have a model? Open one of ours:
You need no account for the price. Sliced files up to 200 MB, models up to 100 MB.
Only have a 3D model? A producer can slice it for you. Start from your model
What we read from the file
cycloidal-drive.gcode.3mf- Nozzle
- 0.4 mm, hardened
- Plates
- 2 · 7h 42m · 256.22 g
Plate 15h 48m209.67 gPETG-CF
Plate 21h 53m46.55 gPETG-CF
Instant quote
- Material
- €15.51
- Machine time
- €10.16
- Setup and packaging
- €14.19
- Cover for failed prints
- €0.77
- Shipping
- on its own line at checkout
This price includes a network fee of €8.13.
Charged only when a producer takes the order
An example worked out from a real sliced file. You see your own file's price as soon as you upload it.
Works with files from
- Bambu Studio
- OrcaSlicer
- Elegoo Slicer
- Creality Print
- PrusaSlicer
Your file becomes a part
01File read
02Price
03Print
04Weighing
05Shipping
06Acceptance
File read
In seconds
Print time, grams, filaments and printer profile, read from the slicer's own data.
cycloidal-drive.gcode.3mf · 256.22 g · 7h 42m
On hold on your payment method
At checkout
The amount goes on hold on your payment method. You are charged when a producer takes the order, and that producer is paid after you accept the part.
€40.63 + shipping
Routed to a verified printer
6 h for the producer to accept
The job goes to a producer whose printer matches its class, nozzle and materials, whatever the brand.
C2
Printed and weighed
7h 42m for this file
Printed with your settings, then photographed on the plate and on the scale before it ships.
Shipped, tracked
The carrier's time
Every parcel is tracked. The tracking code is on your order page.
Producer paid when you accept
72 h to check
You check the part against the criteria you set. Then Stripe pays the producer, or you open a dispute.
Every job goes to a printer that suits it
Every printer in the network belongs to a class, by build volume, open or enclosed frame, and hotend. Your file can also go to a different model, but only one of the same class and only if that printer's producer confirms it.
| Class | Materials | Largest build volume |
|---|---|---|
| C1Open, up to 256 mm | PLA, PETG, TPU | 255×255×260 mm |
| C2Enclosed, up to 260 mm | PLA, PETG, PETG-CF, TPU, ASA, ABS, PC, PA-CF, PET-CF | 260×260×260 mm |
| C3Enclosed, large format | PLA, PETG, PETG-CF, TPU, ASA, ABS, PC, PA-CF, PET-CF | 360×360×360 mm |
| C4Open, large format | PLA, PETG, TPU | 810×805×1010 mm |
| C5Custom and advanced | Declared by the producer | Declared by the producer |
What protects your money and your part
Your money waits until you accept the part
The amount goes on hold when you order and is charged when a producer takes the order. It goes to that producer only after you accept the part, or when a dispute is resolved.
Every producer prints a test model first
Producers verify their identity with Stripe and print our test model with a unique code. The largest order they can take grows with their track record.
The part is weighed before it ships
Every part is photographed on the plate and on a scale before shipping, so its weight can be checked against the grams the slicer worked out.
Files stay yours
We store them encrypted. A sliced file goes only to the assigned producer, through links that expire in 24 hours. To check the price, up to 3 producers can download a model, one at a time. Files are deleted from the producer's side 30 days after completion.
A dispute has a deadline
It starts with a guided comparison of your photos and the producer's, then a decision within 7 days: full or partial payout to the producer, reprint or refund.
The producer keeps your settings
A sliced file is printed as it is: if a parameter needs changing, the producer must declare it and wait for your approval. A model is sliced for the material, quality and strength you chose.
Where your money is
Where the money sits at each step, on the sample file cycloidal-drive.gcode.3mf. Shipping has its own line, and all of it goes to the producer.
| Step | You | On hold | Producer |
|---|---|---|---|
| You order and pay | −€40.63 | €40.63 | – |
| The part is printed and shipped | – | €40.63 | – |
| You accept the part, within 72 h of delivery | – | €0.00 | €32.50 |
Of €40.63, €32.50 goes to the producer and €8.13 is the network fee.
Every price starts from these rates
- 20%Network fee
- Already inside the price you see: the producer pays 20% of their price. If that comes to less than €4 on a small order, you pay the difference.
- 0%Fee on shipping
- You pay shipping at the producer's own price, always on a separate line, and all of it goes to the producer. The print price also includes the card payment cost on the shipping: 1.5% of its amount.
- -30% / +100%Producer's own price
- The rates below give a suggested price. Each producer sets their own by moving it within this range.
| Filament | Per gram | Cover for failed prints |
|---|---|---|
| PLA, PETG | €0.0385 | 2% |
| PETG-CF | €0.0605 | 3% |
| ASA, ABS, PC | €0.0572 | 4% |
| PA-CF, PET-CF | €0.1375 | 6% |
| Class | Per hour |
|---|---|
| C1, C2, C4, C5 | €1.32 |
| C2 with a multi-material unit | €1.65 |
| C3 | €2.20 |
| Setup, each plate | €3.30 |
|---|---|
| Packaging | from €1.65 |
The cover is a share of material and machine time, included in the price, that pays for the producer's failed prints.
Put your printers on the network
The printers you already run will do, whether you have one or many. You get jobs matched to the class, nozzle and materials of your machines. You keep 80% of your price: the customer pays before you print, and your share is released when they accept the part.
€2 – €3
margin per machine hour after the 20% fee, filament, packaging and energy, on three example jobs priced the way every quote is
One of the three: 80 g of PETG, 4 h on a C2
- Your price
- €13.48
- Network fee, 20%
- −€2.70
- You receive
- €10.78
How many hours you sell depends on demand for your class in your country. Each order also takes 15 to 25 minutes of your time: start, removal, photos, packing.
What it takes
- A Stripe account for payouts, needed only from your first paid job
- A test print of our verification model with your declared material
- Photos and tracking for every job
Be among the first to order or to print
Leave your email and we'll write when the network opens to customers or to producers, whichever you choose below.
I need parts printed
On the waitlist you get a welcome code: at your first checkout, 20% of the order's price, shipping excluded, comes as credit.
I have printers
The first producers pay a lower fee on their first 20 orders.
Before you upload
Which files can I upload?
Sliced files from Bambu Studio, OrcaSlicer, Elegoo Slicer, Creality Print, and PrusaSlicer: .gcode.3mf, .gcode or .bgcode. Models too, and a producer slices them: STL, OBJ or 3MF without slicing. STEP files: not yet.
What if my file was sliced for a printer no producer has?
We look for a printer of the same class with compatible volume, nozzle, temperature and enclosure. The producer sees which printer the file was sliced for and must confirm they can print it unchanged before accepting.
Which materials are available?
PLA, PETG, ASA, ABS, PC and carbon-fibre nylon and PET. Carbon-fibre jobs only go to machines with a hardened nozzle.
Can I order several copies?
Yes. On the quote you set the copies, up to 20, and the price is worked out again. Copies of a model are priced as printed together; each copy of a file prepared in a slicer is one more print of its plates.
Where do you ship?
Inside one customs area, so no parcel crosses a customs border: within the EU, between Switzerland and Liechtenstein, or within one of Norway, the United Kingdom, the United States or Canada. The quote tells you whether a producer can take your file for your country.
How do you read my file?
We read the data your slicer already computed, and we never change your file.